This Project aims to build and demonstrate a carbon capture system with >90% CO2 recovery, >95% purity with a potential pathway for <$30/MT capture cost by 2030. Ravi Jain & Norberto Lemcoff of InnoSepra showed these slides at the National Energy Technology Laboratory’s Carbon Management Project Review Meeting in August.
This Project aims to update a 2014 NETL study that quantifies the cost and performance associated with capturing point-source CO2 from industrial plants. It’s a part of the search for CO2 capture, and Sally Homsy and Tim Fout of the National Energy Technology Laboratory presented these slides at the Carbon Management Project Review Meeting in […]
The National Carbon Capture Center is a centralized test facility providing comprehensive support for technology testing and evaluation, relating to process, engineering, operational, analytical, troubleshooting and maintenance. The NCCC aims to accelerate technology development, scale up, cost reduction and commercialization of CO2 capture, utilization and removal. It is sponsored by Sponsored by DOE/NETL, research and industrial […]
The objective of this project is to demonstrate the UK CO2 capture process at Nucor Steel Gallatin treating electric arc furnace evolved gas with a CO2 concentration of ~1.5 vol%.Kunlei Liu and Heather Nikolic of the University of Kentucky showed these slides at the National Energy Technology Laboratory’s Carbon Management Project Review Meeting in August.
This Project aims To execute and complete a front-end engineering and design (FEED) study for a commercial-scale, carbon capture system that separates 95% of the total CO2 emissions at Holcim Ste Genevieve Cement Plant using AirLiquide’s Pressure Swing Adsorption (PSA) assisted Cryocap FG technology.Kevin O’Brien and Hafiz Saith of the University of Illinois at Champaign-Urbana […]
This Project aims to design, build, and operate a 10 MWe Large Pilot membrane capture system. Brice Freeman and Richard Baker of Membrane Technology & Research showed these slides at the National Energy Technology Laboratory’s Carbon Management Project Review Meeting in August.
This Project aims to develop an initial engineering design (IED)and estimated cost for capture and compression of CO2generated from an operational ethanol production facility. It’s a part of the search for CO2 capture, and Jason Laumb, Director of Advanced Energy Systems Initiatives at the University of North Dakota’s Energy & Environmental Research Center showed these […]
This week on ABLC CONNECT, we looked at the State of Advanced Biorefineries, including examples of projects from Gevo, Aemetis, LanzaTech, Grön and Green Plains. The technologies, markets, partners, the rational, the progress to date — all of the inside news on who’s developing what, and where and how are in the the slides ready for you here.
The objective of this project is to harness the power of photosynthetic microalgae to maintain a high-pH, high-alkalinity microalgal culture to create a carbon-negative system for carbon dioxide (CO2) conversion to value-added products from power plant flue gas. Feng Chen of the University of Maryland showed these slides at the National Energy Technology Laboratory’s Carbon […]
LCA is a technique that helps people make better decisions to improve and protect the environment by accounting for the potential impacts from raw material acquisition through production, use, end-of-life treatment, recycling, and final disposal (i.e., cradle-to-grave). Michelle Krynock leads a team of researchers at NETL and showed these slides at the National Energy Technology […]
